WJM Series Static Load Anchor Testing Machine
WJM series microcomputer-controlled electro-hydraulic servo anchorage testing machine is mainly used for the static load anchorage performance test of steel strand-anchor in the construction of railway bridges, water conservancy, electric power and other infrastructures. Static load anchorage and low cycle load performance test of steel strand anchorage with anchors, clamps and connectors to judge whether the mechanical properties of steel strand anchorage meet the specified requirements
Features:
One-button tightening and withdrawing anchor technology.
It can automatically calculate the friction loss rate of the anchor mouth, and can complete the static load anchorage test of anchorage, fixture and connector.
Any number of indication display columns can be configured, and the content, unit and format of the display columns can be set.
The unit of measurement system can be customized, and the required unit of measurement can be set.
Two-level permission management, which specifies different permissions for administrators and testers by default.
The test is based on the group, and the samples in the group can be tested continuously and can be statistically evaluated.
The interface layout can be customized, the number of graphs can be arbitrarily selected from 1 to 3, the layout can also be switched arbitrarily, and the image can be exported as a single image.
It can perform test analysis, display feature points for a single curve, modify it online, and compare multiple curves within a group.
Support single printing, group printing, and report templates can be set separately. The report supports both Excel and MasterReport, and both can be set.
It adopts high-reliability communication protocol, supports response, verification, timeout and other mechanisms, and the underlying communication method can be seamlessly replaced by serial port and Ethernet.
It can be used with a variety of different models, and can support various hydraulic, electronic and some special-shaped testing machines. Each channel can support multiple types of sensors, and at the same time support switching between multiple types of sensors.
The test supports general mode, stretch mode and special mode.
The dedicated mode is completely customized according to the test specifications, and meets the requirements of the specifications to the greatest extent.
The general mode adopts open settings, which can customize the entry name, symbols, rounding up, and formulas; the test can be divided into three stages: preloading, formal loading, and post-processing. Each stage can be customized, and the test steps of formal loading can be edited.
| Model Specifications | WJM-5000 | WJM-6500 |
| Maximum Test Force (Kn) | 5000 | 6500 |
| Measuring Range (kN) | 250~5000 | 250~6500 |
| Force Error (%) | ±1 | ±1 |
| Displacement Measurement Range (mm) | 00～200 | 00～200 |
| Indication Error (%) | ±1 | ±1 |
| Repeatability (%) | ±0.5 | ±0.5 |
| Relative Resolution (%) | 0.5 | 0.5 |
| Long-term Stability (%) | 1 | 1 |
| Piston Stroke (mm) | 200 | 200 |
| Stretch Spacing (mm) | 3400 | 3600 |
TSY-500 Static Load Sleeper Testing Machine
枕木静载试验机是测试混凝土枕木（Ⅰ型枕木、Ⅱ型枕木、Ⅲ型枕木、叉枕、桥枕、宽轨枕等）静载抗裂试验的设备。产品符合TB/T1879-2002《预应力混凝土枕芯静载开裂试验方法》标准。 特点： 本机测力采用高精度载荷传感器、微电脑程序控制、电液比例液压加载系统等技术。 用定位尺（自备）调整枕木位置，使荷重中心与压板中心重合。 按照设定的工作程序，活塞运动自如。 配备三个高精度辐条传感器，确保三个独立压WAW series S type electro-hydraulic servo universal material testing machine
本产品适用于金属、非金属及复合材料、构件的拉伸、压缩、弯曲、剪切等力学性能测试，产品符合国家标准GB/T228.1-2021等金属拉伸试验标准要求. 该产品采用下装式油缸，微电脑控制，电液伺服，具有精度高、操作简单、方便、数据存储量大等优点。 特征： The machine adopts high precision pressure displacement sensor, with highWAW series servo type steel strand special testing machine
WAW series electro-hydraulic servo steel strand special test machine is mainly used for the tensile test of steel strand, can do the tensile, compression and other tests of metal materials; equipped wWAW Series B Electro-hydraulic Servo Universal Material Testing Machine
This product is suitable for metal, non-metal and composite materials, components of tensile, compression, bending, shear and other mechanical properties testing, the product conforms to the nationalTSY-500 Static Load Sleeper Testing Machine
The static load sleeper testing machine is a device for testing the static load crack resistance test of concrete sleepers (Type I sleepers, Type II sleepers, Type III sleepers, fork sleepers, bridgeИнформация по WJM Series Static Load Anchor Testing Machine предоставлена компанией-поставщиком zhejiang luda machinery instrument co.,ltd. Для того, чтобы получить дополнительную информацию, узнать актуальную цену или условия постаки, нажмите ссылку «Отправить сообщение».